User Tools
Sidebar
rudder_cable
This is an old revision of the document!
Rudder Related Repair
The steel cable in the photo above had been recently inspected and seemed okay, but it was 5 years old. Maybe time to go with dyneema. As a precaution some folks move their dyneema lines a bit each year to change where it may be rubbing on the line in their boats….
Rudder Cable Related Repair
If you think there may be any problem remembering how everything should be done/look after you perform cable replacement, take photos of your setup before beginning (or if a connector on one side is somehow incomplete or missing at least take photos of the other side)
- Off the Water Cable Replacement
- Hope this is unnecessary to say, but if you are doing this yourself, you DO want to get it right…
- Oscar Chalupsky Video Using Vacuum Cleaner to feed rudder line
- Epic V10 Cable (dyneema) Replacement
- Whatcom Paddler Discussions
- Replacing Rudder, Cable, Cable Housing (Old rescue) Fenn Mako XT (5 part video series)
- Replacing Rudder
I was adrift in a sea of questions and if answers were lifeboats, I was in imminent danger of drowning. Karen Marie Moning
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
